아나나이트

CHANGZHOU ANYTE 케이블 CO., 주식 회사

ANYTE 케이블, 멀티코어 케이블, UL 케이블,

RV-K 케이블: 기능 및 애플리케이션에 대한 포괄적인 가이드

Introduction to RV-K Cable

RV-K cable, also known as PVC-insulated flexible cable, is a type of cable that consists of copper conductors insulated with PVC (Polyvinyl Chloride) material. It is designed to withstand harsh environmental conditions and is highly resistant to abrasion, oil, and chemicals. The flexibility of RV-K cable makes it suitable for both fixed installations and applications that require frequent movement.

rv-k cable

Features of RV-K Cable

1. Excellent Electrical Conductivity: It is manufactured with high-quality copper conductors, ensuring excellent electrical conductivity. This feature makes it ideal for applications that require efficient transmission of electricity.
2. PVC Insulation: The PVC insulation of RV-K cable provides excellent protection against electrical shocks and short circuits. It also offers resistance to moisture, sunlight, and temperature variations, making it suitable for both indoor and outdoor installations.
3. 유연성: The flexibility of it allows for easy installation and maneuverability in tight spaces. It can be bent and twisted without compromising its performance, making it suitable for applications that require frequent movement.
4. Fire Resistance: It is designed to be fire-resistant, ensuring the safety of installations in case of fire emergencies. It has a low smoke emission and does not propagate flames, making it compliant with strict fire safety regulations.

RV-K 케이블의 애플리케이션

1. Industrial Sector: It is extensively used in the industrial sector for power transmission and distribution. It is commonly employed in manufacturing plants, refineries, and chemical industries due to its resistance to oil, chemicals, and abrasion.
2. Construction Industry: It is widely used in the construction industry for both residential and commercial buildings. It is suitable for wiring applications, such as lighting, power outlets, and HVAC systems, due to its flexibility and durability.
3. Renewable Energy: With the increasing focus on renewable energy sources, they plays a crucial role in solar and wind power installations. Its resistance to UV radiation and harsh weather conditions makes it an ideal choice for connecting solar panels and wind turbines.
4. Transportation Sector: It is utilized in the transportation sector for various applications, including railway systems, airports, and seaports. Its flexibility and resistance to mechanical stress make it suitable for installations that require frequent movement and vibrations.
5. Residential Sector: It is commonly used in residential buildings for electrical wiring, connecting appliances, and lighting fixtures. Its flexibility and ease of installation make it a preferred choice for electricians.

Requirements for the use of RV-K cable

It has excellent flame retardancy, low smoke, low corrosion, low temperature resistance, earthquake resistance, radiation resistance performance, adapt to the working environment of wind power plants, radiation-resistant special cables, mainly used in wind power plants in the power transmission system.

1. Rated voltage (U0/U), from 0.6/1kV to 8.7/15kV respectively according to different product series.
2. The maximum long-term allowable operating temperature of the cable, 85°C.

Installation and Maintenance of RV-K Cable

Proper installation and maintenance of them are essential to ensure its optimal performance and longevity. Here are some key points to consider:

1. 설치: They should be installed following the manufacturer’s guidelines and local electrical codes. It is crucial to avoid sharp bends and excessive tension during installation to prevent damage to the cable.
2. Cable Protection: They should be protected from mechanical stress, moisture, and direct sunlight. It is recommended to use cable trays, conduits, or protective covers to safeguard the cable from potential hazards.
3. Regular Inspections: Periodic inspections of RV-K cable installations are necessary to identify any signs of wear, damage, or loose connections. Prompt repairs or replacements should be carried out to maintain the safety and efficiency of the electrical system.
4. Qualified Professionals: It is advisable to hire qualified electricians or professionals experienced in working with it for installation, maintenance, and repairs. They possess the necessary knowledge and skills to ensure proper handling and adherence to safety standards.

결론

RV-K 케이블 is a reliable and versatile cable that finds extensive applications in various industries. Its exceptional features, such as flexibility, electrical conductivity, and resistance to harsh environmental conditions, make it a preferred choice for many professionals. Whether it is for industrial, construction, renewable energy, transportation, or residential applications, they offers reliable and efficient electrical connectivity. By following proper installation and maintenance practices, you can ensure the longevity and optimal performance of RV-K cable in your electrical systems.

제품 목록

afb37fa8484e02be0ac10e7a0f81222 1661152211100 1

PVC 절연 전원 케이블

지휘자: Class1/2의 구리 지휘자 (연선)
절연: PVC
절연제 색깔: 숫자를 가진 색깔 또는 검정
재킷: PVC
온도 범위:-10 —- +70℃
공칭 전압: 0.6/1KV

더 읽어보기 →
PURmulticorecable_1661577699468-1.jpg

PUR 멀티 코어 케이블

높은 기계적 강도

우수한 내유성

PUR 재킷

♦내유성 및 내마모성 

더 읽어보기 →
UL3321

UL3321 케이블

도체: 단선 또는 연선. 30AWG - 4/0AWG
단열재: XLPE
온도 : 150°C
전압: 600V AC, 750V DC

우수한 기계적 및 전기적 특성

탁월한 열 안정성, 인성 및 내마모성 ♦ 탁월한 내열성, 인성 및 내마모성

더 읽어보기 →
UL20233 케이블

AWM UL20233

단열재: 절연: PE 또는 PVC 또는 SR-PVC 절연

색상: 색상 

♦ 옵션: AL 포일/브레이드 쉴드

재킷: PUR

온도 : 80℃

공칭 전압: 300V

더 읽어보기 →